SPONSORS
2024 ICRBE EXPO |
Pistol Grips
Posted by:
Chris Means
(---.unknwn.ab.dh.suddenlink.net)
Date: January 19, 2007 02:48AM
I can not find too many pistol grips. Where can I find nice new pistol grips? Let's fish, Chris Re: Pistol Grips
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: January 19, 2007 04:41AM
Neals has some and Custom Tackle Supply has something that has just been
re-released. The Weibe clones that Custom Tackle has are a bit pricey though. [www.rodbuilding.org] Raymond Adams Eventually, all things merge, and a river runs through it.. Edited 1 time(s). Last edit at 01/19/2007 04:43AM by Raymond_Adams. Re: Pistol Grips
Posted by:
Ted Morgan
(---.saix.net)
Date: January 19, 2007 05:01AM
It's not too hard to make your own pistol grips, although you do need stuff to shape the cork, and plenty of elbow grease. A good eye andtaking it slow should give you a decent grip, plus you can shape it exactly how you want, rather than modifying a pre-fab grip. Re: Pistol Grips
Posted by:
Anonymous User
(Moderator)
Date: January 19, 2007 09:17AM
RodMaker recently had an article on how to make and shape your own pistol grips. It's quite easy once you understand how the break the overall shape down into a series of more common shapes.
........... Re: Pistol Grips
Posted by:
Anonymous User
(---.kc.res.rr.com)
Date: January 19, 2007 10:08AM
We have some nice looking rather inexpensive pistol grips. They can be found on my website under the cork component section. Or e-mail me direct for inormation.
Thank you- Karen Hapka Bingham Enterprises Binghamenterprises@kc.rr.com Re: Pistol Grips
Posted by:
Chris Means
(---.unknwn.ab.dh.suddenlink.net)
Date: January 19, 2007 11:14PM
Thanks Let's fish, Chris Re: Pistol Grips
Posted by:
Bill Ballou
(---.69-130.unk.tds.net)
Date: January 19, 2007 11:36PM
Found pistol grip on Jannsnetcraft.com. Worked out well for crappie rod. Hope this helps. Bill Sorry, only registered users may post in this forum.
|