SPONSORS
2024 ICRBE EXPO |
loomis black dull finish help
Posted by:
james budzinauskas
(---.182.117.101.adsl.snet.net)
Date: July 24, 2006 02:35PM
after placing my butt assembly on i noticed i had left some glue around tip area so i lightly sanded it off which took off the black dull finish and its now grey how do i replace the finish thanks jimmy Re: loomis black dull finish help
Posted by:
larry pickering
(---.sub-70-216-111.myvzw.com)
Date: July 24, 2006 02:52PM
Mask off, sand with 400 grit and spray with a can of flat black spray paint Re: loomis black dull finish help
Posted by:
Steve Gardner
(---.dyn.embarqhsd.net)
Date: July 24, 2006 07:06PM
You could also do a small thread winding on it to cover up th mistake. Only you will know. Re: loomis black dull finish help
Posted by:
james budzinauskas
(---.182.117.101.adsl.snet.net)
Date: July 25, 2006 04:41PM
ill go with the flat black too much to cover with thread thanks jimmy Sorry, only registered users may post in this forum.
|