I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Single Foot Wire guides
Posted by: Ben Stacy (---.trans.uaf.edu)
Date: May 08, 2006 12:59PM

In the past few days I've seen snake guide benders or makers pop up on the internet. Since I prefer single foot guides, is there a method of producing my own single foot guides? Can I use these snake guide benders to make single foot guides?

Ben

Options: ReplyQuote
Re: Single Foot Wire guides
Posted by: Walter Willoughby (---.elpaso.com)
Date: May 08, 2006 03:37PM

If you are looking at the one from Golden Witch, then no. Micro Mark (www.micromark.com) has some interesting wire bending jigs and pliers. IMO one problem with making one's own guides is treating the raw wire to get the a good temper, hardness and or plating. I have thought about some of those benders for hook keepers and such but at the price of guides and hook keepers why bother.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster