SPONSORS
2024 ICRBE EXPO |
acrylic acetate pen blanks
Posted by:
steve parks
(---.hsv.bellsouth.net)
Date: May 02, 2006 03:40PM
Anybody know where you can get acrylic acetate blanks larger than 3/4x3/4? The 3/4 stuff makes for good seat material but not quite large enough to use for accent rings in grips. Re: acrylic acetate pen blanks
Posted by:
Lynn Williams
(---.clvdoh.adelphia.net)
Date: May 02, 2006 06:20PM
Steve
You might check Craft Supply USA [www.woodturnerscatalog.com] I think they have pen blanks larger than 3/4. Lynn Re: acrylic acetate pen blanks
Posted by:
Gerry Rhoades
(---.vnet-inc.com)
Date: May 02, 2006 09:40PM
Craft Supplies doesn't have anything larger than 3/4" and that's very standard with everyone except Penn State and their standard is 5/8". There is a place in Utah that isn't quite set up on the internet yet, Pedigree Wood, that is going to be selling some beautiful Italian resins, but I don't know if they are any larger or not. Penn State Industries used to sell acrylic bottle stopper blanks, but I don't know if they still do. Arizona Silhouette sells polyester resin bottle stopper blanks made by Ed Davidson in Colorado Springs. Pipe Maker's Emporium in Phoenix sells lucite rods that are 1" square, but they're 18" long and I believe they also have a $100 minimum order. The lucite turns really nice and they have some beautiful colors. Both AZ Silhouette and Pipe Makers Emporium are on the web. I think that Woodturningz sells Inlace Acrylester blanks. I have one piece I got from a penturning friend and it's 7/8" x 1". Re: acrylic acetate pen blanks
Posted by:
John Scarborough
(---.244.186.163.Dial1.StLouis1.Level3.net)
Date: May 09, 2006 08:51AM
It''s possible Atlas Billiard Supply (www.cuestik.com) has the larger blanks. Re: acrylic acetate pen blanks
Posted by:
Randy Hannan
(---.hsd1.il.comcast.net)
Date: February 08, 2011 12:38PM
Jonh,
Can you please email me with the info. you have on the commercial wood stabilizer you mention in your message. Thanks, Randy Sorry, only registered users may post in this forum.
|