I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

New to the Board
Posted by: Mike Doran (---.dsl.hstntx.swbell.net)
Date: April 09, 2006 04:56PM

I have been building rods for several years now and only been reading the board for quite some time. And decided that is was time to chime in and say thanks. The info that I have found here has been of considerable help in my learning experience. What an addictive hobby. I would like to thank all of you Masters for the guidance that I have received.

I do have a question about RMM. I have a subcription and have seen posts about the articles in the current edition, which as yet I have not received. Just wondered if it was my local post office or other problem.


Options: ReplyQuote
Re: New to the Board
Posted by: Spencer Phipps (---.lsil.com)
Date: April 09, 2006 05:08PM

Mike,
They seem to appear at different times over about 10 days depending on where you live. Set aside a set of epoxy application clothes unless you enjoy hard spots in all of them.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster