I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Spinning rod specs
Posted by: Jim Benenson (164.64.146.---)
Date: April 06, 2006 03:33PM

I want to build a spinning rod for a German man (my daughter-in-law's father) who fishes primarily for pike and carp. I was able to find out that he uses about 14 lb.test line, and that length doesn't matter to him. I need some suggestions for a moderately-priced blank for that type of fishing and especially (what else) what guide sizes to use. If you want to throw in reel seat and grip advice, that's fine too.

Thanks in advance,

Jim

Options: ReplyQuote
Re: Spinning rod specs
Posted by: Cliff Hall (---.dialup.ufl.edu)
Date: April 06, 2006 11:03PM

Jim - Your German counterpart - He LIVES here in the USA, or over THERE in Germany? ... If he lives in Germany, given your trans-Atlantic shipping costs, what is the longest box or rod section length that you may be looking for, Jim? -Cliff Hall+++, FL-USA .

Options: ReplyQuote
Re: Spinning rod specs
Posted by: Bob Balcombe (---.rb.gh.centurytel.net)
Date: April 07, 2006 02:48AM

As for guide size, What type of spinning reel does hes use?
Good Wraps Bob

Options: ReplyQuote
Re: Spinning rod specs
Posted by: Jim Benenson (164.64.146.---)
Date: April 07, 2006 11:42AM

Cliff,

He lives in Germany. I'm looking for a multi-piece rod that I (and he) can fit in a suitcase.

Bob,

I have no idea. I assume that it's the right size for 14-lb test (medium/large).

Thanks to both of you,

Jim

Options: ReplyQuote
Re: Spinning rod specs
Posted by: Raymond Adams (---.hsd1.ca.comcast.net)
Date: April 07, 2006 07:22PM

There are more than a few 4pc 8wt flyrod blanks listed
on the CCS data site that would foot the bill nicely as
a spinning rod.
You may be able to find a 3pc spinning blank in a catalog.
I'll check the batson catalog and see what they have and
post if they do.

Raymond Adams
Eventually, all things merge, and a river runs through it..

Options: ReplyQuote
Re: Spinning rod specs
Posted by: Cliff Hall (---.dialup.ufl.edu)
Date: April 08, 2006 03:53AM

BATSON RAINSHADOW GRAPHITE ROD BLANKS
For European Pike & Carp - 14# Travel Rod
www.FISHSTICKS4U.com - Robert Tignor


RS-RX6 3-PIECE SPIN-Bass TRAVEL RODS
[www.fishsticks4u.com]
SB-78-1-3; SB-78-3-3; SB-84-1-3; SB-84-3-3; SB-84-5-3

SB781-3 Clear Gloss 6'6" 3 6-12lb. 1/8-3/8oz.
0.535 4.5 Fast Med-Lt 1.85oz. 30.80-Add

SB783-3 Clear Gloss 6'6" 3 10-17lb. 5/16-3/40z.
0.545 5.0 Fast Med–Hvy 2.40oz. 41.23-Add

SB841-3 Clear Gloss 7'0" 3 6-12lb. 1/8-3/8oz.
0.615 5.0 Fast Med-Lt 2.40oz. 43.82-Add

SB843-3 Clear Gloss 7'0" 3 10-17lb. 5/16-3/40z.
0.630 6.0 Fast Med – Hvy 2.65oz. 45.57-Add

SB845-3 Clear Gloss 7'0" 3 12-25lb. 3/8-1 1/4oz.
0.600 7.5 Fast X-Hvy 3.45oz. 62.16-Add


RS-RX7 3-PIECE SPIN MULTI-PURPOSE TRAVEL RODS
[www.fishsticks4u.com]
ISP-84-3-3; ISP-84-4-3

ISP843-3 Matte Clear 7'0" 3 6-12lb. 1/4-5/8oz.
0.450 5.0 Mod-Fast Med 1.70oz. 76.00-Add

ISP844-3 Matte Clear 7'0" 3 8-17lb. 3/8-3/4oz.
0.450 5.0 Mod-Fast Med-Hvy 2.01oz. 78.00-Add


RS-RX7 3-PIECE Bass-CASTING TRAVEL RODS
[www.fishsticks4u.com]
IC-74-7-3; IC-84-7-3

IC747-3 Matte Clear 6'2" 3 12-25lb. 1/2-2oz
0.600 7.5 Fast Hvy 2.43oz. 85.00-Add

IC847-3 Matte Clear 7'0" 3 12-25lb. 1/2-2oz
0.530 6.0 Fast Hvy 2.82oz. 95.00-Add

Rod Length in INCHES (not feet + inches)
"-3" terminal code = 3-PIECE Rod Blank
-Cliff Hall+++, Gainesville, FL-USA

Options: ReplyQuote
Re: Spinning rod specs
Posted by: Raymond Adams (---.hsd1.ca.comcast.net)
Date: April 08, 2006 10:25AM

You beat me to it Cliff,
Thanks!

Raymond Adams
Eventually, all things merge, and a river runs through it..

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster