SPONSORS
2024 ICRBE EXPO |
Browning Rod blanks
Posted by:
Dan Colville
(---.bflony.east.verizon.net)
Date: March 03, 2006 03:51PM
Hey guys. Do you know where i can get browning rod blanks. I have seen a custom one out there before. Thanks for all the help.
Sincerely, Dan Colville Re: Browning Rod blanks
Posted by:
Anonymous User
(Moderator)
Date: March 03, 2006 04:12PM
If you are referring to the old SilaFlex blanks, which Browning bought in the mid 70's, they have been out of production for nearly 20+ years. Browning's rods are currently made on oriental blanks supplied to a large corporation.
.................. Re: Browning Rod blanks
Posted by:
Spencer Phipps
(---.hsd1.wa.comcast.net)
Date: March 03, 2006 10:30PM
I see some of the Citori blanks on @#$%& every once in a while. Re: Browning Rod blanks
Posted by:
Joe Preast
(---.221.141.67.ip.alltel.net)
Date: March 04, 2006 10:25AM
I have several of the Browning Citori Blanks if that is what you are looking for.
HAGO! Joe Re: Browning Rod blanks
Posted by:
Kobus
(---.saix.net)
Date: March 25, 2006 06:10AM
Hi,
I am looking for silaflex Blanks made by silaflex . Or Browning silaflex blanks,. In South Africa we knew these blanks as silaflex Magnum blanks. 65 Magnum was 6'5" very light with a very long thin tip. All the action was in the tip. 70 Magnum was 7" also a very long thin tip with action mostly in tip but more back bone than the 65 magnum. 80 magnum was 8' also a long tip action in tip but much more back bone than 70 magnum. I would apriciate any help in obtainning some of these blanks. Thank you Kobus South Africa Re: Browning Rod blanks
Posted by:
Kobus
(---.saix.net)
Date: March 25, 2006 06:10AM
Hi,
I am looking for silaflex Blanks made by silaflex . Or Browning silaflex blanks,. In South Africa we knew these blanks as silaflex Magnum blanks. 65 Magnum was 6'5" very light with a very long thin tip. All the action was in the tip. 70 Magnum was 7" also a very long thin tip with action mostly in tip but more back bone than the 65 magnum. 80 magnum was 8' also a long tip action in tip but much more back bone than 70 magnum. I would apriciate any help in obtainning some of these blanks. Thank you Kobus South Africa Sorry, only registered users may post in this forum.
|