SPONSORS
2024 ICRBE EXPO |
permagloss can project
Posted by:
Carrington Tate
(---.wellsfargo.com)
Date: March 03, 2006 10:21AM
good morning,
I bought a can at ace hardware that is aluminum in color on the outside and dark grey on the inside. The guy working insisted that it was "unlined", but i wanted to ask everyone before i put any permagloss in it. What do you think? Thanks, have a great weekend Carrington Tate Durango, CO Re: permagloss can project
Posted by:
Bruce Wetzel
(---.nmci.navy.mil)
Date: March 03, 2006 10:53AM
Sounds like teflon lined to me. Re: permagloss can project
Posted by:
Fred Yarmolowicz
(66.252.177.---)
Date: March 03, 2006 01:35PM
Unlined will look the same on the inside as on the outside,Permagloss is hot and will eat through liner and contaminate the finish Freddwhy (Rapt-Ryte) Re: permagloss can project
Posted by:
Carrington Tate
(---.wellsfargo.com)
Date: March 03, 2006 02:53PM
That's what i figured, but the paint guy was pretty confident, so i bought. I'm taking it back today! Thanks for the help.
Carrington Sorry, only registered users may post in this forum.
|