I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

RodMaker Magazine - Tom Kirkman
Posted by: George Dirgo (---.proxy.aol.com)
Date: February 24, 2006 06:23PM

Tom, I'm a new suscriber to the magazine. I also ordered all the back issues for volume 5. I plan on ordering all the back issues listed on the web site. I understand that these are becoming available in binders. I'll be firing off a check to you for volume 6 in the binders here real quick. My question to you , Is there any way I can obtain a binder for the volume 5 issues? It would be real nice to have them all in binders. Thanks.

George

Options: ReplyQuote
Re: RodMaker Magazine - Tom Kirkman
Posted by: Emory Harry (---.hsd1.or.comcast.net)
Date: February 24, 2006 06:36PM

George,
Tom is off at the show in Charlotte through the week-end so you may not get an answer from him for a day or two. But I think that the answer to your question is yes.
I sure agree with you that to have all of the issues of RodMaker in binders would really be nice. It would be a virtual encyclopedia of custom rod building.

Options: ReplyQuote
Re: RodMaker Magazine - Tom Kirkman
Posted by: John Blair (---.rgv.res.rr.com)
Date: February 24, 2006 09:51PM

I haven't gotten this month's issue yet.......Have you guys?

Big John
Rio Hondo, Texas
Blessed are those who can give without remembering and take without forgetting

Options: ReplyQuote
Re: RodMaker Magazine - Tom Kirkman
Posted by: bill boettcher (---.nas55.newark2.nj.us.da.qwest.net)
Date: February 24, 2006 10:03PM

I got mine a couple of days ago. I finally got an issue before some one else

Options: ReplyQuote
Re: RodMaker Magazine - Tom Kirkman
Posted by: Tony Politi (---.dyn.optonline.net)
Date: February 24, 2006 10:56PM

I got mine today, great so far.

Tony

Options: ReplyQuote
Re: RodMaker Magazine - Tom Kirkman
Posted by: Raymond Adams (---.hsd1.ca.comcast.net)
Date: February 24, 2006 11:49PM

Got mine yesterday! YAHOOOO!

Raymond Adams
Eventually, all things merge, and a river runs through it..

Options: ReplyQuote
Re: RodMaker Magazine - Tom Kirkman
Posted by: Mo Yang (---.lsanca.dsl-w.verizon.net)
Date: February 25, 2006 01:07PM

Mine too yesterday. Tom's back page musing on the internet and printed page is right on. Anyways, great mag, beautifully printed.

Mo


Options: ReplyQuote
Re: RodMaker Magazine - Tom Kirkman
Posted by: Dennis J. Danku (---.mad.east.verizon.net)
Date: February 25, 2006 07:56PM

I too,just rec'd mine today.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster