SPONSORS
2024 ICRBE EXPO |
Thread color on Lamiglass
Posted by:
Bob Wilson
(---.as.wcom.net)
Date: February 21, 2006 01:59PM
I am not very color coordinated. I have a 3 piece Lamiglass fiberglass (Tan) rod. I also have a spool of brown classic thread. My concern is the ferrule wraps. Any other color recomendations. I'm open to any idea.. Re: Thread color on Lamiglass
Posted by:
Jim Benenson
(164.64.146.---)
Date: February 21, 2006 02:08PM
Bob,
Why not use the brown for the guide and ferrule wraps? The latter do not have to be invisible and in fact will look odd if you choose a thread to match to the blank color that isn't very close. Most of the time I try to match the reel insert color as closely as possible, or else try to match the blank color for every wrap. (I much prefer the former.) I am not very color-coordinated either, so often I ask my wife (who is) what I should use. Don't be afraid to ask any non-fisher, as they're not as locked into what a rod should look like as we are. Jim Re: Thread color on Lamiglass
Posted by:
Todd R. Vivian
(---.lamiglas.com)
Date: February 21, 2006 04:00PM
Bob,
I have built many of these rods personally. The brown is a very traditional color on that blank color and if you wish to get a little more into the traditional cane type make ups then there are some greens and oranges that look very nice also. Todd Regards, Todd Vivian Mud Hole Custom Tackle todd@mudhole.com Re: Thread color on Lamiglass
Posted by:
LARRY PIRRONE
(---.los-angeles-10rh15-16rt.ca.dial-access.att.net)
Date: February 22, 2006 07:13PM
i have built several of these. get some pearsols silk in chestnut and don't use color preserver. don't use the gossimer use the thicker stuff. get it from golden witch. i have also used orange and black jasper (actually brown). yellow and black jasper (actually a light green) would look great. use color preserver on the jasper threads. they are a gudbrod product. i got mine from neal's fishing products. Re: Thread color on Lamiglass
Posted by:
Bob Wilson
(66.243.134.---)
Date: February 23, 2006 03:56PM
Thanks for the ideas. I'll let you know how it turns out. Sorry, only registered users may post in this forum.
|