I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Pages: Previous12
Current Page: 2 of 2
Re: HELPPPPPPP my wifes screwed up BIG
Posted by: allen forsdyke (---.server.ntli.net)
Date: February 16, 2006 02:45PM

hahahahahahahahahaha
dear old wife has said she will replace ALL my thread and anything else that is unsalvageable
mmmmmmmmmmmm
new wrapper .... new tools ........ jeeeeeez the list will be endless i`ll stick with the threads thatll cost her a couple of hundred

Thanks guys

Options: ReplyQuote
Re: HELPPPPPPP my wifes screwed up BIG
Posted by: Jesse Buky (---.exis.net)
Date: February 16, 2006 03:04PM

Lot to be said about that old saying we had in the Navy, "There are four things that a sailor dosen't need, A dog, a Wife, civilian clothes , and a car. Jesse

Options: ReplyQuote
Re: HELPPPPPPP my wifes screwed up BIG
Posted by: Mark Gibson (---.mmm.com)
Date: February 16, 2006 03:18PM

Allen,

I would recommend that you use Mineral Spirits (aka Lacquer Thinner) if you still need any clean-up solvent for silicone oil.

Silicone Oils are very non-polar, so the best solvents tend to be non-polar hydrocarbons......Heptane, Hexane, etc. work very well on silicone oils because of their low polarity index. Mineral Spirits is a good off the shelf substitute that you can find in home/hardware stores.

Water, alcohols, acetone are very poor clean up solvent for silicone oils.

mark

Options: ReplyQuote
Re: HELPPPPPPP my wifes screwed up BIG
Posted by: bill boettcher (---.250.156.109.Dial1.Weehawken1.Level3.net)
Date: February 17, 2006 06:15AM

Not to get you upset but some thing to be careful of, if your wife cleans say the living room with that stuff, it can stay in the air and travel into your finish depending how close your are to it.

Options: ReplyQuote
Pages: Previous12
Current Page: 2 of 2


Sorry, only registered users may post in this forum.
Webmaster