SPONSORS
2024 ICRBE EXPO |
Gluing EVA to burl cork.
Posted by:
Tim Collins
(---.hsd1.mi.comcast.net)
Date: February 03, 2006 09:02AM
I've got some of Andy's Laguna burl cork rings that I'm going to use Titebond III to glue together - the color of Titebond III matches these rings very well. In some of Tom's previous articles, contact cement seems the best adhesive for gluing EVA foam to Eva foam. But what's my best choise to glue an EVA foam ring to one of Andy's burl cork rings - contact cement or Titebond III ? Thanks. Re: Gluing EVA to burl cork.
Posted by:
Anonymous User
(Moderator)
Date: February 03, 2006 09:57AM
Neither - use two part epoxy.
............... Re: Gluing EVA to burl cork.
Posted by:
Mike Barkley
(67.149.18.---)
Date: February 03, 2006 11:35AM
I generally use Rod Bond but last week I tried Contact cement and it seems to be working very well, but don't know how it would do long term. Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Edited 1 time(s). Last edit at 02/03/2006 11:36AM by Mike Barkley. Sorry, only registered users may post in this forum.
|