SPONSORS
2024 ICRBE EXPO |
Forecast Easy Tight Aluminum Reel Seat
Posted by:
Jason Alvarado
(---.osis.gov)
Date: February 02, 2006 03:51PM
Does anyone know where to find one of these? I saw one mounted on a rod in the photo gallery but I cant find it online, anywhere! It looks like a solid piece of gear. Re: Forecast Easy Tight Aluminum Reel Seat
Posted by:
Neal Cissel
(---.phnx.qwest.net)
Date: February 02, 2006 04:32PM
Jason, Give me the link so I can see what it looks like? I carry Forecast products.
Neal's Fishing Products Re: Forecast Easy Tight Aluminum Reel Seat
Posted by:
Bill Batson
(---.olympus.net)
Date: February 02, 2006 08:45PM
The Batson / Forecast Easy Tight Aluminum Reel Seat ( ETAHD22M- B, B/G, B/BL, S, S/G, S/BL ) reel seat is available through any one of our Authorized Distributors. We have had alot of success with this new Salt Water Reel Seat. "Designed by the Batson Team" -
* Machined From Marine Grade Aluminum * Hard Anodized Finish * Machined Hoods that are Pressed & Glued in place for strength * *Set Bach Slide band design - to make Nuts accessible **Raised Lobe nut design to facilitate better hand tightening ** Numerous color combinations for that custom look **Front Hood & Slide band reel foot pockets identified with DOTS for easier Guide alignment & reel installation ( MY Favorite Part ) . Take a look at our website for full dimentions & color combinations. Come see it in person at the Big Show. Mark Crouse & Scott Throop both have made Custom Rods with these seats. These kinds of improvements are only possible through all the support the Industry has shown to the Batson TEAM.. We Thank You all.. Bill Batson CEO Batson Enterprises Rainshadow/Forecast Product line 877-875-2381 www.batsonenterprises.com batson@batsonenterprises.com Re: Forecast Easy Tight Aluminum Reel Seat
Posted by:
Jason Alvarado
(---.osis.gov)
Date: February 03, 2006 01:22PM
Neal, I tried to find the picture again but didnt have any luck. I see that Mr. Batson has listed the model numbers, maybe you can bounce them off of your inventory. I would greatly appreciate. Thank you gentlemen for the response, I look forward to using your product Mr. Batson. Re: Forecast Easy Tight Aluminum Reel Seat
Posted by:
Anonymous User
(---.hsd1.nj.comcast.net)
Date: February 03, 2006 04:30PM
jason Try here
[www.batsonenterprises.com] [www.allcoastsportfishing.com] Edited 1 time(s). Last edit at 02/03/2006 04:32PM by Barry D Thomas Sr. Sorry, only registered users may post in this forum.
|