SPONSORS
2024 ICRBE EXPO |
stupid question
Posted by:
Stephen Gerber
(---.proxy.aol.com)
Date: January 25, 2006 05:36PM
what is the point of a Winding check Re: stupid question
Posted by:
Neil Toland
(---.dsl.louisacomm.net)
Date: January 25, 2006 05:48PM
Two points I can think of are, it's pretty, and, it's something to purchase. Re: stupid question
Posted by:
bill boettcher
(---.250.39.8.Dial1.Weehawken1.Level3.net)
Date: January 25, 2006 05:50PM
For looks and to hide that big hole that was made from over reaming. Re: stupid question
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: January 25, 2006 05:57PM
Smoother surface to wind thread up against for dummies like me that forget to lathe it straight before reaming it too big, but if customers ask, it's a pretty! Putter Williston, ND Re: stupid question
Posted by:
allen forsdyke
(---.server.ntli.net)
Date: January 25, 2006 06:19PM
mmm well said putter its just an "anti cock up device" but it does make the wraps look neater (so long as you dont put it on crooked ) Re: stupid question
Posted by:
Tom Nair
(---.ptldor.dsl-w.verizon.net)
Date: January 25, 2006 07:45PM
Usually you have a nice nickel silver ring on the hood of your real seat that butts up against your grip. The winding check compliments the front of the grip. Re: stupid question
Posted by:
Steve Gardner
(---.dyn.sprint-hsd.net)
Date: January 25, 2006 08:02PM
extra aparts to have around the shop. nothing worse then a shop with out parts laing around Re: stupid question
Posted by:
Ken Preston
(---.longhl01.md.comcast.net)
Date: January 25, 2006 08:36PM
And you can have them in nylon, rubber, aluminum in several colors as well as hosels in all the same material choices ... and if you do bamboo you can have round ones and hexagonal ones too to misplace! Re: stupid question
Posted by:
William Bartlett
(---.proxy.aol.com)
Date: January 25, 2006 08:51PM
Stephen,
The only stupid question is the one NOT ASKED!!! Bill in WV Re: stupid question
Posted by:
vance corbett
(---.chvlva.adelphia.net)
Date: January 25, 2006 09:25PM
Winding checks... the mast boot of the rod building world. Re: stupid question
Posted by:
Randy Parpart (Putter)
(---.propel.com)
Date: January 25, 2006 11:06PM
Aaarrrrggggghhhh , matey! Putter Williston, ND Sorry, only registered users may post in this forum.
|