SPONSORS
2024 ICRBE EXPO |
Weaving tools
Posted by:
Steven Penzes
(---.abhsia.telus.net)
Date: January 15, 2006 12:00PM
I'm thinking of doing a small weave on my next rod. Could somebody direct me to a source for the right tools? For example: it seems to me I've seen a small tool that slides onto the blank and which keeps the longtitudinal threads both captured and aligned. However for the life of me I can't remember where I saw it (possibly a link on the left or maybe somebody posting a picture in the Photo section). I'm not looking to do a full butt wrap (a la VisualWrap type) as I'll be doing a lighter weight fly rod. Any pointers as to where/how to start or experiences/hints with doing small weaves would also be appreciated.
Thanks Steve Re: Weaving tools
Posted by:
John Bumstead
(---.s231.apx1.lnh.md.dialup.rcn.com)
Date: January 15, 2006 12:31PM
Steven: Perhaps you are thinking of a weaving jig. I use one sold by a gentleman from San Diego and it is the only "Tool" you'll need, other than maybe a pick of some kind. John Re: Weaving tools
Posted by:
Randy Parpart (Putter)
(---.propel.com)
Date: January 15, 2006 12:37PM
I'm not sure where to get one, but if you email Doc Ski, I'll bet he could steer you to someone. Putter Williston, ND Re: Weaving tools
Posted by:
Jim Kastorff
(---.proxy.aol.com)
Date: January 15, 2006 12:43PM
I tried to email you but your address is blocked, email me at sdrodblder@aol.com for info Re: Weaving tools
Posted by:
Anonymous User
(Moderator)
Date: January 15, 2006 02:42PM
Mud Hole sells several types and they are a sponsor of this site. Try to support those who support this site, if possible.
Some of the other sponsors also offer various weaving jigs and looms. ..................... Re: Weaving tools
Posted by:
Steven Penzes
(---.abhsia.telus.net)
Date: January 15, 2006 03:30PM
Tom,
Thanks for the pointer. I did in fact check at Mud Hole but I surfed to the wrong section. This time I did a search and found the right spot. Steve Re: Weaving tools
Posted by:
Robert Tignor
(---.hsd1.va.comcast.net)
Date: January 15, 2006 11:12PM
Steven , we have the new line of tools from Mark Crouse on our website Fishsticks4u.com and also on the sponsor list . He has two weaving jigs to pick from and also schematics . They are on the New Products page no our website . If any questions call 804-746-9711 Robert Sorry, only registered users may post in this forum.
|