SPONSORS
2024 ICRBE EXPO |
Mooseskin
Posted by:
Will Whitaker
(---.proxy.aol.com)
Date: January 14, 2006 01:05PM
I was wondering what type of advesives can be used to anchor Mooreskin grips. I'm trying to use something other than Stabond.
Thanks, Will Whitaker Re: Mooseskin
Posted by:
David von Doehren
(---.proxy.aol.com)
Date: January 14, 2006 01:38PM 1) Rod Bond, 2) regular epoxy.....3)............. Dave von Doehren PRRODS......If man built it , man can fix it.and if man built it man can break it ! Re: Mooseskin
Posted by:
Jay Lancaster
(12.174.137.---)
Date: January 14, 2006 02:15PM
Get RodBond and use it for everything (almost). You won't go without it again.
Jay Re: Mooseskin
Posted by:
Will Whitaker
(---.proxy.aol.com)
Date: January 14, 2006 02:19PM
Will flex coat rod builders epoxy work? Re: Mooseskin
Posted by:
David von Doehren
(---.proxy.aol.com)
Date: January 14, 2006 02:42PM
Will, Yes FC rod builders epoxy will work, the high build, lite build, the other brands too. Dave von Doehren PRRODS......If man built it , man can fix it.and if man built it man can break it ! Re: Mooseskin
Posted by:
Mark Griffin
(---.lsanca.dsl-w.verizon.net)
Date: January 14, 2006 02:53PM
Will,
The Diamondite Hypalon adhesive is nice because it's so slippery, which really helps if you've got to stretch the grip much. You might want to drop Tim a note at his link on the left to ask about it's bond with EVA. I can only speak for Hypalon because that's all I've used it on. In the past I've used the Flex Coat epoxy on hundreds of grips w/o a failure. Stick to the standard (slow cure) stuff though if you've got to stretch it much. I found the 5 minute formula to be too "sticky" if you need the grip to grow some. Mark Griffin [] C&M Custom Tackle San Dimas, California Sorry, only registered users may post in this forum.
|