SPONSORS
2024 ICRBE EXPO |
White Blank
Posted by:
Greg Wegener
(---.dhcp.fdul.wi.charter.com)
Date: January 11, 2006 09:38PM
Who would have a 6' -7' Med or Med Light, White "One" Pc Blank? Re: White Blank
Posted by:
Andy Dear
(---.stic.net)
Date: January 11, 2006 10:14PM
Greg,
I have a couple of CTS blanks that are white...fantastic blanks, very VERY light, and crisp. Call or email me anytime at: 210-845-7456 aldear@lamarreelseats.com Andy Dear Lamar Mfg. Re: White Blank
Posted by:
James(Doc) Labanowski
(---.proxy.aol.com)
Date: January 11, 2006 11:35PM
Hi Greg could you be more specific on what tyupe rod you are interested in. There are a lot of 6 to 7 foot blanks.
Sorry shakey fingers double post. Edited 1 time(s). Last edit at 01/11/2006 11:36PM by James(Doc) Labanowski. Re: White Blank
Posted by:
James(Doc) Labanowski
(---.proxy.aol.com)
Date: January 11, 2006 11:35PM
Hi Greg could you be more specific on what tyupe rod you are interested in. There are a lot of 6 to 7 foot blanks. Re: White Blank
Posted by:
bill boettcher
(---.250.45.61.Dial1.Weehawken1.Level3.net)
Date: January 12, 2006 08:58AM
Check out Donart. last time I looked they had several at good prices. Re: White Blank
Posted by:
Greg Wegener
(---.central.biz.rr.com)
Date: January 12, 2006 10:43AM
Sorry,,, this will be a spinning rod,,,light tackle 1/8-1/2oz. need fast tip, will be used for jigging Walleyes,,,light line 4-8lb. test Re: White Blank
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: January 12, 2006 11:39AM
In a white blank, sensitivity for walleye, call Andy on those CTS blanks. You won't be sorry. Putter Williston, ND Re: White Blank
Posted by:
Spencer Phipps
(---.ca-sanfranc0.sa.earthlink.net)
Date: January 12, 2006 11:43AM
What length? The CTS blanks that Andy has are light tipped, fast blanks should work fine. You could always get something like the St Croix 3S63MXF from many of the sponsors to the left and have it painted or do it yourself. That blank was designed to be fished with 6 lb line for walleye. There are many blank choices, but the white color is going to have to be a paint job on your part. Sorry, only registered users may post in this forum.
|