SPONSORS
2024 ICRBE EXPO |
Guides re-spacing & re-wrapping
Posted by:
Pawel Sulek
(212.160.172.---)
Date: December 29, 2005 09:43AM
Hi
I want to wrap new guide to the rod and change the spacing. Do I have to remove old finish to wrap the guides to the blank? Or should I simply put the guides on the finish and wrap them? Any good idea about dealing with "holes" in the finish after replacing? Thanks Pawel Re: Guides re-spacing & re-wrapping
Posted by:
Cliff Hall
(---.dialup.ufl.edu)
Date: December 29, 2005 12:13PM
Pawel Sulek - Do yourself a favor and read this recent Post. Check out those Articles by ROQ, and see what lies ahead. Try & See if a quick scrape & touch-up job is is all you need, ... or the more elaborate re-finish. -Cliff Hall+++
Oops....badly stated question! Keith Tymchuk 12-27-05 [www.rodbuilding.org] "... How can I best remove ALL of the spar urathane (varnish) from a blank before I redo it.....rewrap it, ..." - Keith Tymchuk Re: Oops....badly stated question! Cliff Hall 12-27-05 08:05 "Kudos to Scott VanGuilder's advice. Specifically: for removing the thread finish under / around the line guides after removal - "...etc. -Cliff Hall Edited 1 time(s). Last edit at 12/29/2005 12:14PM by Cliff Hall. Sorry, only registered users may post in this forum.
|