I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

And by the way......
Posted by: Andy Dear (---.stic.net)
Date: December 28, 2005 09:51PM

I just wanted to let you all know that if any of you have ANY questions/comments/concerns or problems with ThreadMaster or any of the products we sell, please feel free to contact me anytime. I take phone calls at my home office until 9:00pm central time.

My contact numbers are:
Office phone: 210-845-7456
Home Office: 830-460-4265

I am trying really hard to provide not only some high quality unique products, but top notch technical support and customer service to go with it.

If any of you have any suggestions, please email me directly at aldear@lamarreelseats.com

Andy Dear
Lamar Mfg.

Options: ReplyQuote
Re: And by the way......
Posted by: bill boettcher (---.nwrk.east.verizon.net)
Date: December 28, 2005 10:07PM

Andy

Receved the Threadmaster. Thanks.

Options: ReplyQuote
Re: And by the way......
Posted by: Ellis Mendiola (---.dsl.hstntx.swbell.net)
Date: December 28, 2005 10:13PM

Andy, I have been doing some research on my family name. I found out that the first settlers along the lower Texas coast were Mendiolas. In fact they named the bays whose names you use for the exotic cork. There might be an infringement there somewhere but we can settle out of court if you will send me a thousand rings of your newest cork. Another great product.

Options: ReplyQuote
Re: And by the way......
Posted by: Andy Dear (---.stic.net)
Date: December 28, 2005 10:26PM

That's hilarious...seriously.


Andy

Options: ReplyQuote
Re: And by the way......
Posted by: Scott Throop (---.ventca.adelphia.net)
Date: December 29, 2005 12:55AM

....Yea...and my last name shares the first 3 letter of one of your products.....I could use some reel seats...or you might be stuck with a warehouse full of Eadmaster! LOL!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster