SPONSORS
2024 ICRBE EXPO |
Feather Inlay practice blank
Posted by:
Bruce A. Tomaselli
(---.dioceseaj.org)
Date: December 20, 2005 01:22PM
I have some old fly rod blanks that have a glossy finish on them. Could I use them for practicing feather inlays or does the finish have to be matte. Re: Feather Inlay practice blank
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: December 20, 2005 02:45PM
Bruce, the glossy will work fine for this. I'd wrap some different colors of thread and put some finish over them, too, just to see what different feathers look like over different colors, too! Putter Williston, ND Re: Feather Inlay practice blank
Posted by:
Stan Grace
(---.hln-mt.client.bresnan.net)
Date: December 20, 2005 02:46PM
glossy will work but I would scuff slightly with grey scotch brite pad to help adherence. Stan Grace Helena, MT "Our best is none too good" Re: Feather Inlay practice blank
Posted by:
Bob Crook
(---.onspeed.com)
Date: December 20, 2005 03:07PM
I use wooden dowels coated with permagloss or spar varnish for thread color test wraps and have put feather inlays on them also, then finish them, set them outside in the weather to get an idea on what will looks the best after 3 or 4 months. Have some out now but they are covered with 3 feet of snow so won't be able to look at them until spring, if it ever comes.
Bob Sorry, only registered users may post in this forum.
|