SPONSORS
2024 ICRBE EXPO |
Aftcote finish
Posted by:
Curtis Uyema
(---.hawaii.res.rr.com)
Date: December 13, 2005 08:43PM
Hi,
I'm curious to know how the longevity on the aftcote finish is. Will it stand up to daily use and abuse. Also how does it stand up to other epoxy finishes. Re: Aftcote finish
Posted by:
Randy Search
(---.lsanca.dsl-w.verizon.net)
Date: December 13, 2005 08:57PM
Curtis,
I use Aftcote all the time and really like it. I used to use LS Supreme but I like Aftcote a bit better. It has an extremely long pot life and handles external heat very well. It can sometimes be finicky as far as mixing exact measurements go but as long as you measure properly no problems. As far as longevity, I've never had a problem with it. You might want to also look at Threadmaster. I've tried it and like it better than Aftcote. Randy. Edited 1 time(s). Last edit at 12/13/2005 08:58PM by Randy Search. Re: Aftcote finish
Posted by:
Curtis Uyema
(---.hawaii.res.rr.com)
Date: December 14, 2005 03:31AM
Thanks for your reply. I'll try to do some research on that thread master. Re: Aftcote finish
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: December 14, 2005 09:24AM
Just click on SEARCH near the top and type in Threadmaster and you will get plenty of info. Also, go to the Lamar site on the left
Mile Re: Aftcote finish
Posted by:
Duane Richards
(---.rn.hr.cox.net)
Date: December 14, 2005 06:08PM
I too use Aftcote and like it better than anything I've ever tried.
DR Sorry, only registered users may post in this forum.
|