SPONSORS
2024 ICRBE EXPO |
Camo Blanks
Posted by:
Tom Danielson
(---.dtccom.net)
Date: December 06, 2005 10:48PM
I was thinking a camo rod for the creek.
Low and behold this months Field and Stream new stuff for 06 there it is. Who might offer the blank? Is there a way one might finish a blank with a como tone to it? Re: Camo Blanks
Posted by:
Henry Curtis
(---.proxy.aol.com)
Date: December 06, 2005 11:03PM
Check the photo page under Tom Kirkman's name. He made some of these a good while back. Also seems like somebody was making and offering such blanks lately. Not sure who though. Re: Camo Blanks
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: December 06, 2005 11:12PM
Rod Blanks.com on the left has the camo blanks in two patterns. Look Sharp!
Mike Re: Camo Blanks
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: December 06, 2005 11:14PM
Rod Blanks.com on the left has the camo blanks in two patterns. Look Sharp!
Mike Re: Camo Blanks
Posted by:
Jim Rippe
(---.an4.chi30.da.uu.net)
Date: December 06, 2005 11:53PM
Tom, I am too looking for a Camo blank. I contacted Scott from Rod Blanks.com because they have offered them. Below is the response I got on 2 December. I think we need someone out there to do custom colors along with camo.
We should be up and running around May, maybe sooner. We should be able to give estimates around March, when we get all of our equipment. We will be able to do any size blank and in multiple pieces as well. Turn around time will be probably 1-2 weeks depending on how many you send at one time. Edited 2 time(s). Last edit at 12/06/2005 11:56PM by Jim Rippe. Re: Camo Blanks
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: December 07, 2005 12:34AM
CTS has camo blanks I think ? Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Camo Blanks
Posted by:
Spencer Phipps
(---.ca-sanfranc0.sa.earthlink.net)
Date: December 07, 2005 09:33AM
Diamondback also sold camo blanks for a while, they may still have some at the Cortland store site. Re: Camo Blanks
Posted by:
Tom Danielson
(---.dtccom.net)
Date: December 07, 2005 08:58PM
thanks I sure did find some at rodblanks.con and that will take care of that - price is pretty good I think
thanks again Re: Camo Blanks
Posted by:
Scott Melton
(---.proxy.aol.com)
Date: December 07, 2005 10:36PM
Hi Everyone we were having another company camo our blanks at first but turn around time was terrible so we have begun to start up a new company that will allow us to Camo almost any rod blank that is sent to us or out of our own inventory. We will be also offering wood grain and woven graphites patterns.
We are working very hard at getting this going and designing our own equipment so that in will allow us to do longer blanks but we will also do reel seats and guns, bows, what ever. Thanks we look forward to serving your needs. Scott Melton CEO BlackBear Pontoons Inc. Rod-Blanks.com 206-372-9998 Re: Camo Blanks
Posted by:
Jim Rippe
(---.an7.chi30.da.uu.net)
Date: December 08, 2005 09:20PM
Well, Cortland/Diamondback is out of it. Received this email today.
Thank you for your e-mail requesting information. We do not have any Cam-O-Flage blanks available. We are sorry we could not be of assistance. Please let us know if you have any questions. Again, thank you for contacting the Cortland Line Company, Inc. Sincerely, Nancy L. Stout Administrative Assistant Cortland Line Company, Inc. 3736 Kellogg Road, PO Box 5588 Cortland, NY 13045 Phone: (607) 756-2851 Ext. 111 Fax: (607) 753-8835 E-Mail: nstout@cortlandline.com Cortland Line Company, Inc. [www.cortlandline.com] Sorry, only registered users may post in this forum.
|