SPONSORS
2024 ICRBE EXPO |
Enlarging EVA inside DIA.
Posted by:
Michael Friddle
(---.triad.res.rr.com)
Date: December 03, 2005 05:04PM
What is the best way to do this? I have seen the pilot drill bits by Flex Coat but they ues a 1/4" tube to help guide through arbors. I am trying to drill out EVA that has a larger inside dia. than 1/4" to 1/2". Would you just use a drill bit?
Thanks for your help!! Re: Enlarging EVA inside DIA.
Posted by:
Jerry Poindexter
(---.hsd1.tx.comcast.net)
Date: December 03, 2005 06:54PM
Why not use a reamer? I picked up one of those long, telescopic crappie rods and made oversized reamers for EVA on big butt salt rods. The EVA will stretch some, but if you've done inlays, reaming some is safer. Billy ? Re: Enlarging EVA inside DIA.
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: December 03, 2005 07:30PM
Like Jerry said, Go with the reamers.
Mike Sorry, only registered users may post in this forum.
|