SPONSORS
2024 ICRBE EXPO |
Jet 1014VS should I?
Posted by:
Don Jones
(65.213.88.---)
Date: November 21, 2005 11:55AM
I've been building rods now for almost 1 year and up to this point I've pretty much built bass rods only. The bass rods are all split grip no foregrip. Right now I have a Grizzly Hobby Lathe that I use for shaping my handles. Would I benefit at all by getting a Jet? I like new toys and I don't really care about the cost. If there is absolutely no benefit, I probably wouldn't go for it. Would it make the job easier? Would it do a better job than the Grizzly? Also, I am considering the variable speed, is the a major benefit or does it just save time? Any convincing would be appreciated Re: Jet 1014VS should I?
Posted by:
Michael Sledden
(208.21.98.---)
Date: November 21, 2005 12:24PM
I am not sure all what a Grizzly hobby lathe can handle, but if you wanted to get into turning wood handles or turning of other items in wood, I would think the Jet lathe, which is the one I have, would be the better tool to have. I have been getting into turning all sorts of things other than things for fishing rods. I really like my Jet lathe. The only thing I would do differently is get the variable speed version. Re: Jet 1014VS should I?
Posted by:
John Kepka
(---.iad.untd.com)
Date: November 21, 2005 12:31PM
I agree variable speed is really handy. When you consider all the other accessories needed, then the variable speed is a reasonable, in my opinion. I really do not care for changing the belt on the PSI turncrafter Pro to change speed. I have a smaller variable speed lathe and like it much better for sanding and polishing at different speeds. Re: Jet 1014VS should I?
Posted by:
Gerry Rhoades
(209.200.194.---)
Date: November 21, 2005 03:35PM
Be aware that even with the VS Jet, you still need to change belts. The speed is variable but only within the range of a particular pulley combination. I don't know exactly what it is, but I seem to recall that there are three speed ranges. I use my Jet mini for turning a LOT of wood and only really use two speeds, 500 rpm for drilling and sanding and 2475 rpm for turning. Only occasionally do I need to use the very highest speed. Also, be advised that the lathe itself is a relatively small investment compared to what you will have if you really get into turning wood. You can easily invest several times the cost of the lathe in tools and chucks. Re: Jet 1014VS should I?
Posted by:
Stan Gregory
(---.dyn.sprint-hsd.net)
Date: November 21, 2005 03:54PM
I have the varible speed jet and really like it . Keep finding useful things it can be used for. If you get one, strongly consider getting the bed extrension as well, as it improves the Jet's usefulness and makes it more versatile. Bought mine through Amazon and got free shipping. As Gerry mentioned, youll need some good truning tools and might end up requiring several different chucks. Stan Re: Jet 1014VS should I?
Posted by:
Andrew White
(66.204.20.---)
Date: November 21, 2005 04:16PM
If you're just going to turn cork, then the Jet is overkill. That being said, if you have the money, go ahead and get it, as you'll find plenty of useful things to do with it. You can turn wood grips for rods, but you can also turn candlesticks, napkin rings, pens, small bowls, etc. Re: Jet 1014VS should I?
Posted by:
Bill Moschler
(---.ag.utk.edu)
Date: November 23, 2005 02:58PM
Get the Jet and get a 3 jaw chuck. Be better for sanding grips and you can use it for many other things. Sorry, only registered users may post in this forum.
|