SPONSORS
2024 ICRBE EXPO |
Re: When finishing a wrap do you always "bury" the cut end under the wrap?
Posted by:
Ross Andersen
(---.bayview1.jhmi.edu)
Date: November 11, 2005 02:01PM
When I pull the tag end through my finished wrap, I will pull the tag fairly firmly back toward the finished wrap. Then I use a sharp razor blade to cut the tag end as close as possible. Since it is under pressure the wrap will snap back and cover the fuzzies. This results in nice neat wraps and no need to get the lighter out. Sorry, only registered users may post in this forum.
|