SPONSORS
2024 ICRBE EXPO |
RB.org Vendors: Need a TFO TiCr 10'0" 7wt 4pc
Posted by:
Joshua Markvan
(208.165.251.---)
Date: November 03, 2005 12:40PM
I posted a similar request last night but I should have been more specific.
I have a order for a TFO TiCr 10 foot 7 weight in 4 pieces. Can any board vendors get me this blank?? Can't seem to find it. Josh Markvan www.markvanheirloom.com Re: RB.org Vendors: Need a TFO TiCr 10'0" 7wt 4pc
Posted by:
Lanny De Rose
(---.proxy.aol.com)
Date: November 03, 2005 01:17PM
Joshua:
Hello. According to the TFO website the only 10' 4 piece 7 wt. offered by them is in the professional series. TFO does not sell the 10' 7 wt. blank only the 9' 7 wt. blank of that series. Lanny Re: RB.org Vendors: Need a TFO TiCr 10'0" 7wt 4pc
Posted by:
Joshua Markvan
(208.165.251.---)
Date: November 03, 2005 02:42PM
Thanks Lanny.
I think I'm gonna have to contact Temple Forks directly to see if by some chance they would sell me this blank. Unless by some chance a vendor has one on hand. After all, they have to make the blank to build their factory rod on right? Thanks for the response, Lanny. Josh Markvan www.markvanheirloom.com Re: RB.org Vendors: Need a TFO TiCr 10'0" 7wt 4pc
Posted by:
Joshua Markvan
(208.165.251.---)
Date: November 04, 2005 09:28AM
I see what you're saying. This blank was probably in the Pro series, not the TiCr. Josh Markvan www.markvanheirloom.com Re: RB.org Vendors: Need a TFO TiCr 10'0" 7wt 4pc
Posted by:
Anonymous User
(Moderator)
Date: November 04, 2005 01:27PM
Yes they do have to make it, or have someone else make it. It's an oriental made blank and it may be that they don't purchase any more than they need to build their rods on. You'd just have to ask the folks at TFO.
.............. Sorry, only registered users may post in this forum.
|