SPONSORS
2024 ICRBE EXPO |
Wrapping grip transitions
Posted by:
Stephen Altenbach
(---.dixie-net.com)
Date: November 01, 2005 12:45AM
Well i got my leather grips on and i sanded em down and sealed up and sanded again etc and now im starting to wrap them, and im having a hard time getting the thread to go up the ramp. When i wrapped over the EVA the first time i didnt have much of a problem, should i maybe lightly sand the finish to allow the thread to grip more?
any suggesions would be great thanks! Re: Wrapping grip transitions
Posted by:
Dan Hogan
(---.lsanca54.dynamic.covad.net)
Date: November 01, 2005 08:55AM
Ease off the thread tension, a lot, when going up the ramp. DAMHIKT
Dan Hogan The only way to have a friend, is to be one. Re: Wrapping grip transitions
Posted by:
bill boettcher
(---.250.39.174.Dial1.Weehawken1.Level3.net)
Date: November 01, 2005 09:04AM
Dan
I have not done one yet, but would it not be easyer to wrap like a butt wrap and go from the leather down hill onto the eva ?? Re: Wrapping grip transitions
Posted by:
Jesse Buky
(---.exis.net)
Date: November 01, 2005 10:00AM
Take a razor blade and taper the leather about 1/8 to 1/4 inch and you should wrap right up over it, just like tapering a guide foot. Jesse Sorry, only registered users may post in this forum.
|