SPONSORS
2024 ICRBE EXPO |
flecoat wrap finnishes/turning cork handles
Posted by:
greg burrows
(---.bchsia.telus.net)
Date: October 31, 2005 12:54AM
1. For my steelhead float rods I am wrap the guides with size A threadand no colour presev. I am thinking of using flex coat low or high build with possably two coats. I have not yet used it before, what would you recomend?, or is there a better product avaliable?
2. The rods I am building are two part 10 -12ft with 1.25 dia. cork glued to the but section i am looking for a inexpensive lathe to turn down the handles whie on the rod. I do not want to use a drill, any recomondations? Re: flecoat wrap finnishes/turning cork handles
Posted by:
bill boettcher
(---.nyc.untd.com)
Date: October 31, 2005 08:09AM
If you like to read try the Search funtion up in the red banner.
Type in things like - thread finish and cork laths.There is a lot of infor there. Sorry, only registered users may post in this forum.
|