SPONSORS
2024 ICRBE EXPO |
Rod and blank rack
Posted by:
Jeff Hunter
(---.direcpc.com)
Date: October 26, 2005 02:20AM
I'm building a stand-up rack for my rods and blanks and am looking for the little rubber "grabbers" for the top of the rack. Does anyone know where these are available from? I thought about just using a strip of rubber and cutting a slit in front of each recess but would rather go with the individual holders of I can find them.
Thanks, Jeff Hunter Re: Rod and blank rack
Posted by:
Spencer Phipps
(---.lsil.com)
Date: October 26, 2005 09:16AM
I just drilled holes in the rack and inserted 1/4 inch o-ring material in the holes. Made them long and cut to fit after I had test drove it some. Auto /truck parts stores have it in bulk so you can build your own o-rings in the field. Re: Rod and blank rack
Posted by:
Anonymous User
(---.houston.res.rr.com)
Date: October 26, 2005 11:20AM
I build these in lots of 12 and sell locally. I do not use the rubber clip but employ a leverage system to keep them in place. If you would like to see a picture e-mail me:
rods-n-reels@houston.rr.com They are solid pine with casters and are rust proof fasteners, not plywood or composites. Sorry, only registered users may post in this forum.
|