SPONSORS
2024 ICRBE EXPO |
Does anyone make multi piece spinning blanks?
Posted by:
Tim Collins
(---.sanarb01.mi.comcast.net)
Date: October 03, 2005 03:23PM
In a conversation with a custom rod builder friend, his favorite spinning rod for Steelhead and even Salmon was the Gloomis 1024 4 piece IM6 blank which is no longer available. I've seen numerous 2 pieces blanks but no 3 or 4 piece ones. Does anyone know of any (other than subsituting a fly blank)? Thanks. Re: Does anyone make multi piece spinning blanks?
Posted by:
Anonymous User
(Moderator)
Date: October 03, 2005 03:58PM
Look under the heading "travel blanks" when you can find them. There are plenty of 2 piece models around, but less 3 and 4 piece models. Still, a few companies do offer a few.
............ Re: Does anyone make multi piece spinning blanks?
Posted by:
Billy Vivona
(4.43.114.---)
Date: October 03, 2005 04:23PM
GUSA will make any blank into a 3 piece, but it costs more. Ralph O'Quinn did a 45 minute Demo in Charlotte, plus did a Rodmaker article on how to do this yourself a while back. Too bad I missed the DEmo, and the article. It's not hard to do though, I just haven't got around to it. Re: Does anyone make multi piece spinning blanks?
Posted by:
Anonymous User
(Moderator)
Date: October 03, 2005 06:41PM
That's true - you can make your own and get good results. I would still look for a factory multi-piece in the length and power I wanted, but failing that, find a 1 or 2 piece and finish it out with your own ferrules. All is not lost.
............... Re: Does anyone make multi piece spinning blanks?
Posted by:
Magnus Högberg
(---.bredband.comhem.se)
Date: October 04, 2005 01:37PM
If you buy blanks here in Sweden, it's almost impossible to find anything but 2-5 piece blanks.
They also tend to be longer. The average spinning rod, except for UL blanks, is 8-10', whereas most rods i've seen om Mudhole etc is 6-8'. Re: Does anyone make multi piece spinning blanks?
Posted by:
Todd R. Vivian
(---.lamiglas.com)
Date: October 04, 2005 05:48PM
Tim,
Lamiglas offers an 8'6" 12-25 lb. 1/2 - 1 3/4 oz lure in a 3pc. Todd Regards, Todd Vivian Mud Hole Custom Tackle todd@mudhole.com Sorry, only registered users may post in this forum.
|