SPONSORS
2024 ICRBE EXPO |
Need advice on getting epoxy into guide feet tunnel
Posted by:
keith fischer
(---.marvin.com)
Date: August 16, 2005 08:06AM
Looking for advice on how best to get finish into those nasty little tunnels between the guide wrap and blank. My current approach in inadequate as the size 6 and 7 guides will come loose from time to time.
Thanks in advance. Re: Need advice on getting epoxy into guide feet tunnel
Posted by:
bill boettcher
(---.250.201.119.Dial1.Weehawken1.Level3.net)
Date: August 17, 2005 06:06PM
Use the forhan locking wrap and also check your thread tension, may not be tight enough Sorry, only registered users may post in this forum.
|