SPONSORS
2024 ICRBE EXPO |
Rodmaker
Posted by:
Sammy Mickel
(---.r4.ncreed.infoave.net)
Date: August 13, 2005 09:56PM
I see on a regular basis where some that visit this board can't decide whether to subscribe to the magazine or not. Here's one of the best reasons to do it, when you just can't remember that certain tip or trick on a wrap or spacing and so on you can just thumb through your previous copies. That is exactly what I did this morning and it saved me a ton of aggrevation and a half spool of thread.
Go on and make the call or email, I promise you won't regret it! Re: Rodmaker
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: August 13, 2005 10:00PM
I'll 2nd that!!!!!! Re: Rodmaker
Posted by:
Dave Gilberg
(---.pghk.east.verizon.net)
Date: August 13, 2005 11:12PM
The value of RodMaker cannot be overstated. With each new issue your personal library expands in many directions. In just a few years you'll have the most formidable reference resource of rod building information available anywhere. The cost is incredibly low for such a treasure. Kudos to Tom K. for this outstanding publication which keeps improving.
Dave Sorry, only registered users may post in this forum.
|