SPONSORS
2024 ICRBE EXPO |
Ferrules for Bamboo Rod
Posted by:
Robert Widmaier
(---.sttlwa.dsl-w.verizon.net)
Date: August 11, 2005 09:12PM
I have a firend who is repairing a bamboo fly rod and is looking for replacement ferrules. Any suggestion where he may find them? I have already suggested he go to Golden Witch. I am not a bamboo rod builder so I have no experience here.
Thanks in advance. Bob Widmaier Re: Ferrules for Bamboo Rod
Posted by:
Anonymous User
(Moderator)
Date: August 12, 2005 07:51AM
I don't know what Neal's may have along those lines, but I'd check him as well. It all depends on the particular rod and what type ferrules are needed. Golden Witch is certainly a good place to start.
......... Re: Ferrules for Bamboo Rod
Posted by:
Neal Cissel
(---.phnx.qwest.net)
Date: August 12, 2005 10:14AM
Bob,
Email me and tell me what size you are looking for? Best Regards, Neal Cissel Neal's Fishing Products Re: Ferrules for Bamboo Rod
Posted by:
larry pirrone
(---.ontrca.adelphia.net)
Date: August 12, 2005 03:41PM
golden witch is a good sourse. they are probably nickle silver if it was a decent rod. some rods used step down ferruls and i am told it is important to stay with them if that is how it was originally designed. if the maile ferrul looks like it "steps down" where it slides then it is a step down ferrul. the rod taper would have been designed to take that type of ferrul. the ferrul station would have been cut 1/64 or 2/64 smaller
than the rest of the male ferrul station. if you try top put swiss ferruls on that step down will be too small and there will be movement. not a good thing. the overall length of the ferrul is also important. if the rod is designed with standard ferruls you will want to use that. if it was designed with truncated ferruls(shorter) you will want ot use those. Re: Ferrules for Bamboo Rod
Posted by:
David Henney
(---.ks.ok.cox.net)
Date: August 13, 2005 02:11AM
What is the brand of Bamboo rod?? I have numerous ferrules for bamboo rods. The best place to score ferrules for bamboo is rod restorers..
Thanks Dave Sorry, only registered users may post in this forum.
|