SPONSORS
2024 ICRBE EXPO |
need gold tape for underwrap on old rod
Posted by:
Buzz Butters
(---.dotnet.com)
Date: July 23, 2005 02:22PM
I am refurbishing an old fiberglass rod in which there was an open spiral wrap of brown thread. Under the brown thread and on top of the blank was a gold tape.
I want to match the original wraps with those sections I have to repair. any idea where i can get a gold tape that will stick to the blank and allow finish to stick to it??? Thanks a bunch, Buzz Butters Re: need gold tape for underwrap on old rod
Posted by:
Randy Parpart (Putter)
(---.propel.com)
Date: July 23, 2005 02:42PM
Jann's netcraft has it in 1/8" wide, Buzz. Putter Williston, ND Re: need gold tape for underwrap on old rod
Posted by:
Anonymous User
(---.proxy.aol.com)
Date: July 23, 2005 04:31PM
Pin Striping Tape from Automotive Paint Specialty House
3 M Brand - Various widths and colors Overwrap about 1/2 turn before pulling off - be prepared to trim nib after first coat of finish. Got this information from Jesse Buky about two weeks ago and it works fine. Gon Fishn Re: need gold tape for underwrap on old rod
Posted by:
Bob Balcombe
(---.rb2.gh.centurytel.net)
Date: July 23, 2005 04:39PM
You can also go to a craft store like Michal's
Good Wraps Bob Sorry, only registered users may post in this forum.
|