SPONSORS
2024 ICRBE EXPO |
direction of decal
Posted by:
Bryan Burbank
(66.0.239.---)
Date: July 20, 2005 03:39PM
building a rod for a friend that wants his name on rod...which way should i install
decal...going up the rod to tip or going down towards butt...thanks bryan... Re: direction of decal
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: July 20, 2005 03:53PM
Personall, I put all decals pointing towards the tip so that when holding/looking at the rod, it reads left to right
Mike Re: direction of decal
Posted by:
Joe Douglas
(---.povn.com)
Date: July 20, 2005 04:30PM
I also put decals on from butt to tip just because I think it looks better that way. You see all kinds of different styles and they all work so do whatever you like best. Joe Douglas Re: direction of decal
Posted by:
Jason Pritchard
(---.relistar.com)
Date: July 21, 2005 12:18PM
It also depends what side of the rod you are looking at. On the left side of the rod I put my decals on tip to butt, on the right side, butt to tip. I do this because on fly rods people often lay down the rod with a fish next to it, and if it was not done this way the decal would not show up correctly in the photo. My .02 Sorry, only registered users may post in this forum.
|