I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

drying motor
Posted by: Luis Villarreal (208.209.117.---)
Date: July 17, 2005 11:44AM

What can i use as a homemade drying motor. I don't have one. I been doing pretty good without one, but I would like to see how it works.

Luis Villarreal
www.bass_v_rods@yahoo.com
Rio Grande City, Tx

Options: ReplyQuote
Re: drying motor
Posted by: Darrin Dembowski (---.cpe.net.cable.roger)
Date: July 17, 2005 01:32PM

You can order one from Cabela's or possibly one of the sponsors to the left or alternately get a humidifier motor from home depot,a lamp cord with a clicker and a small transducer all for a couple of bucks.
Cheers

Options: ReplyQuote
Re: drying motor
Posted by: Raymond Adams (---.hsd1.ca.comcast.net)
Date: July 17, 2005 01:46PM

Hi Luis,
An old barbeque rotisserie works very well too!

Raymond Adams
Eventually, all things merge, and a river runs through it..

Options: ReplyQuote
Re: drying motor
Posted by: Anonymous User (Moderator)
Date: July 17, 2005 01:55PM

Flex Coat offers ready made drying units. Custom Tackle Supply and Fish Sticks 4U both offer the individual drying motors if you want to make your own.

A dryer/rotator isn't absolutely necessary for a nice looking finish job if you have the time to turn by hand every few minutes, but they can be quite a convenient in either case.

............

Options: ReplyQuote
Re: drying motor
Posted by: Luis Villarreal (208.209.117.---)
Date: July 17, 2005 02:40PM

Thax guys

Options: ReplyQuote
Re: drying motor
Posted by: capt. ray brown (---.152.120.238.Dial1.Atlanta1.Level3.net)
Date: July 17, 2005 07:56PM

LUIS,
WE HAVE THE DRYING MOTORS IN STOCK.THEY COME IN 18-20,20-24-30-36 RPM,PLEASE CHECK OUR WEB SITE FOR MORE INFO.
THAN KS. CAPT. RAY FISHSTICKS4U.COM

Options: ReplyQuote
Re: drying motor
Posted by: Anonymous User (---.riogrd01.nj.comcast.net)
Date: July 17, 2005 09:42PM

Luis;
check @#$%& under sporting goods-rod building

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster