SPONSORS
2024 ICRBE EXPO |
transparent blue paint
Posted by:
James Dement
(---.gci.net)
Date: July 07, 2005 02:22PM
forgot who was asking about it, but I found testors transparent blue paint at wal-mart if anyone was or is interested. Re: transparent blue paint
Posted by:
Mike Nicolle
(---.direcpc.com)
Date: July 07, 2005 03:28PM
Hi James,
Any other transparent colors? And do they work? Thanks, Mike Re: transparent blue paint
Posted by:
bill boettcher
(---.cvx.algx.net)
Date: July 07, 2005 06:21PM
Hi james
Is it a spray? What does it read on the container, lacquer / enamel Re: transparent blue paint
Posted by:
Mike Nicolle
(---.direcpc.com)
Date: July 07, 2005 09:41PM
Hi Bill,
I found that color at testors.com under their "Model Master Acryl Acrylics" in the paint listing. They have 141 different colors, 4 or 5 in clear. Now the question is "will they work" for marblizing? Please let me know. Thanks, Mike Re: transparent blue paint
Posted by:
bill boettcher
(---.cvx.algx.net)
Date: July 07, 2005 10:17PM
Maybe some thing to think about might be the Klass Kote epoy paint that comes in different colors. Since it is already colored. They used to be a sponsor here ? Re: transparent blue paint
Posted by:
James Dement
(---.gci.net)
Date: July 08, 2005 02:44AM
Yes, it was a spray. I dont know much about marbaling so I do not know if it would work or not. I would be interested in learning mor about marbaling though. Also, I think the can said it was enamel. There were several colors as well including: candy purple, cany red,saphire blue metal flake, purple burgandy metal flake, and many more. I have never used these paints on a blank, but if any of you have or will be using this, please let me know how it turns out. GOOD LUCK! Re: transparent blue paint
Posted by:
bill boettcher
(---.250.45.38.Dial1.Weehawken1.Level3.net)
Date: July 08, 2005 07:11AM
Do a search of this board under Marbling and you should come up with a lot of info Sorry, only registered users may post in this forum.
|