Blank Question

Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.
Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.
Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

Re: Blank Question

Posted by: Spencer Phipps (---.hsd1.wa.comcast.net)

Date: July 06, 2005 07:46PM

In the old days, the folks at Angler's Workshop, Lamiglas, Loomis and Fenwick were pretty much in the same area if not the same building. Jim Britt at Angler's is retired now, but his son's there and they always were able to help me over the years matching older blanks with the newer stuff.
Usually they were Lamiglas BMB blanks that matched up very well, but the selection isn't as large in that blank line as it used to be. Still between the two places just a few feet apart they have a large knowledge base to work from. Angler's also carries Seeker and Calstar to work from.
Hope they can help you.

Options: Reply•Quote