SPONSORS
2024 ICRBE EXPO |
Quick Devcon question
Posted by:
Phil Richmond
(---.200-68.tampabay.res.rr.com)
Date: June 23, 2005 08:18PM
For those using Devcon for reel seat/grip repairs, injecting from large needle, what minute epoxy are you using? They make a lot of different types, I have the 5 minute stuff. Re: Quick Devcon question
Posted by:
Mike Nicolle
(---.direcpc.com)
Date: June 23, 2005 08:27PM
Hi Phil,
Because there 5 min. as pretty quick, and quicker the warmer it gets. I'd use something alittle slower. I use the 2 hour and it does a good job. Good luck. Mike Re: Quick Devcon question
Posted by:
Ken Finch
(---.int.bellsouth.net)
Date: June 23, 2005 08:38PM
You won't be able to load the 5 min stuff into your syringe quick enough. Ditch it and get some Devcon 2-ton slow cure stuff. Most any hardware store sells it. It gives you about 20 minutes to work with it. Re: Quick Devcon question
Posted by:
bill boettcher
(---.250.45.35.Dial1.Weehawken1.Level3.net)
Date: June 23, 2005 08:38PM
yes use the two hour one it will give you time to make sure you have it all in. Then let it sit overnight to dry. Re: Quick Devcon question
Posted by:
Phil Richmond
(---.200-68.tampabay.res.rr.com)
Date: June 23, 2005 09:14PM
Thanks! Sorry, only registered users may post in this forum.
|