I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

OD of the Struble U15 recessed hood?
Posted by: Dan Sparks (---.sb.sd.cox.net)
Date: June 11, 2005 01:08PM

I’m waiting for delivery of a Struble U15 seat for a light saltwater rod, and would like to turn the grip this weekend. If anyone knows the OD of the recessed hood, I would greatly appreciate the specs. It isn’t posted on the Struble site. Thanks

Options: ReplyQuote
Re: OD of the Struble U15 recessed hood?
Posted by: Andy Snedden (---.bchsia.telus.net)
Date: June 11, 2005 02:41PM

Dan,

O.D. of the U-15 hood is:

20.73 mm

0.816 inch

Andy Snedden

Options: ReplyQuote
Re: OD of the Struble U15 recessed hood?
Posted by: Dan Sparks (---.sb.sd.cox.net)
Date: June 11, 2005 04:00PM

Thanks you very much, Andy.

Options: ReplyQuote
Re: OD of the Struble U15 recessed hood?
Posted by: Roger Williams (---.94.140.67.ip.alltel.net)
Date: June 12, 2005 12:02AM

That seat should come with a cork ring inletted to fit the hood. Check out Struble's web site to verify.

Options: ReplyQuote
Re: OD of the Struble U15 recessed hood?
Posted by: Dan Sparks (---.sb.sd.cox.net)
Date: June 12, 2005 01:37AM

It does, Roger. However, I want to turn the seat this weekend, so I will ream a ring to fit, and save the one that comes with the seat for another rod.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster