SPONSORS
2024 ICRBE EXPO |
First Wraps/Rod
Posted by:
Joe Asinger
(---.dsl.ksc2mo.swbell.net)
Date: June 01, 2005 07:08PM
[www.rodbuilding.org]
The link above is for my wraps on my first rod. I have had a time trying to get this post up. Joe <*}(({{>>{ Re: First Wraps/Rod
Posted by:
Ed Sabatini
(---.ipt.aol.com)
Date: June 01, 2005 08:32PM
You're off to a good start. Keep at it! Re: First Wraps/Rod
Posted by:
Joe Luebeck
(---.but-mt.client.bresnan.net)
Date: June 01, 2005 11:20PM
Good looking wrap!!! Re: First Wraps/Rod
Posted by:
Bob Balcombe
(---.rb2.gh.centurytel.net)
Date: June 02, 2005 02:37AM
Good start!!! From there you can make a great deal of differnt designs
Good Wraps Bob Re: First Wraps/Rod
Posted by:
bill boettcher
(---.250.57.31.Dial1.Weehawken1.Level3.net)
Date: June 02, 2005 08:00AM
Hint: when you clear or CP it watch it for a little while , some times the threads tend to move depending on tension.
Nice looking wrap. Re: First Wraps/Rod
Posted by:
Ellis Mendiola
(---.dsl.hstntx.swbell.net)
Date: June 02, 2005 06:53PM
You are hooked now, buddy. Now you will lay in bed at night and wonder what design you can wrap next. Good tart. Re: First Wraps/Rod
Posted by:
Joe Asinger
(---.dsl.ksc2mo.swbell.net)
Date: June 02, 2005 07:16PM
Hooked is right.
Laying in bed at night and thinking about it is the least of my problems. I have to start paying attention in meetings at the job. They drone on for a while and I am thinking about the next rod I build and what type of wrap I will do. Then some says "what do you think Joe?". I 'm thinking I might try a more complex wrap next time. Joe <*}(({{>>{ Re: First Wraps/Rod
Posted by:
bill boettcher
(---.250.129.71.Dial1.Weehawken1.Level3.net)
Date: June 03, 2005 08:15AM
Befor you leave tell all of them about your rods. Get some sales going Sorry, only registered users may post in this forum.
|