SPONSORS
2024 ICRBE EXPO |
Source for acryllic/celluloid?
Posted by:
Brian Issa
(---.hsd1.or.comcast.net)
Date: May 15, 2005 07:30PM
Does anyyone have a source for pieces of acryllic/celluloid that are bigger than the standard pen blank dimensions?
Thanks, Re: Source for acryllic/celluloid?
Posted by:
Anonymous User
(Moderator)
Date: May 15, 2005 09:05PM
HUT and one other that doesn't come to mind at the moment, have at least a couple types that are about 3/4 inch diameter. The selection of these larger pieces is very limited however.
In a near future issue of RodMaker, we'll show you how to make your own, any color, any pattern, any size. The days of having to accept what the pen makers are offered is nearing an end. .......... Re: Source for acryllic/celluloid?
Posted by:
bill boettcher
(---.an1.nyc41.da.uu.net)
Date: May 16, 2005 07:06AM
Try Tap Plastics [www.tapplastics.com] Re: Source for acryllic/celluloid?
Posted by:
Anonymous User
(Moderator)
Date: May 16, 2005 09:11AM
Craft Supplies USA is another good source. Tru-Stone is a good material but somewhat hard to turn.
................. Re: Source for acryllic/celluloid?
Posted by:
bill boettcher
(---.an1.nyc41.da.uu.net)
Date: May 16, 2005 09:35AM
If you feel like playing they can be made from epoxy and a mold. Can also be colored. " tinted " Sorry, only registered users may post in this forum.
|