SPONSORS
2024 ICRBE EXPO |
Sage 490 RPL help
Posted by:
Ben McLean
(---.hsd1.mi.comcast.net)
Date: May 08, 2005 01:29PM
Hi,
I lost what I now believe is the "notched hood" from my Sage 490 RPL when the butt cap fell off. I checked struble's website, but none of the reel seats seem to match exactly. I am not sure that it really matters, because all I need is the notched hood. It was black. Anyone know about what Sage usually uses for these rods, or could anyone direct me to a good place to get just a notched hood? I have an email pending with Sage. Thanks for any advice, Ben Re: Sage 490 RPL help
Posted by:
Anonymous User
(---.hsd1.co.comcast.net)
Date: May 08, 2005 04:22PM
Hi Ben,
You might try REC. [www.rec.com] Have a look around their website and see if they have something similar. Although, I'm sure if you bought the rod as a finished rod that Sage will waranty the fix. Mark Re: Sage 490 RPL help
Posted by:
Jeff Shafer
(---.phil.east.verizon.net)
Date: May 08, 2005 07:03PM
Hopefully Sage will be able to help out. They provided a butt cap for a friend's fly rod when it dropped off.
Good Luck, Jeff Shafer Re: Sage 490 RPL help
Posted by:
Bill Moschler
(---.westk01.tn.comcast.net)
Date: May 08, 2005 08:38PM
I had a couple of Sage RPL's. I think mine had the Struble G reel seat, a machined alumium black uplocking seat of a small diameter.
I think you need to talk to Sage. If you send them the rod and 20 bucks (I think,) they will fix it and send it back to you. I do not know if they will just send you a part. Anyway you need to call Sage and find out how to proceede. Re: Sage 490 RPL help
Posted by:
Ben McLean
(---.hsd1.mi.comcast.net)
Date: May 08, 2005 11:07PM
Thanks for the help guys - I really appreciate it. I will contact Sage, and then potentially struble.
Take care, Ben Sorry, only registered users may post in this forum.
|