SPONSORS
2024 ICRBE EXPO |
20 mm skeletons
Posted by:
Edward D. Smith
(---.ard.bellsouth.net)
Date: April 24, 2005 09:02PM
Can anyone tell me one of the sponsors who carry 20 mm reel skeletons for wood inserts? I can find 16-18 mm but not the 20 mm. I thought of cutting out the center part of a conventional reel seat and using the two ends. I want it for a rod with a 0.52 inch but section. Any help or suggestions appreciated.
Thanks, Ed Re: 20 mm skeletons
Posted by:
sanford hochman
(---.hsd1.ma.comcast.net)
Date: April 24, 2005 09:52PM
Ed,
You are right. They are not made as far as I know. In all the rods I have made with a large wooden reel seat custom made, I had to cut a reel seat 20 or 22 or so and that way got what I wanted. The reel seat ended up just fine. Sanford Hochman Re: 20 mm skeletons
Posted by:
Art Parramoure
(---.252.148.195.Dial1.Chicago1.Level3.net)
Date: April 25, 2005 02:29AM
Ed, it is actually cheaper to do it that way than to buy the skeleton seats.
Tight lines Art mrparramoure@yahoo.com Sorry, only registered users may post in this forum.
|