SPONSORS
2024 ICRBE EXPO |
Vetre Matrix Handles from American Tackle are in!
Posted by:
Joe Meehan
(---.se.biz.rr.com)
Date: March 31, 2005 06:07PM
Hi All,
The Vetre Matrix Handles are in. They will begin shipping orders today. They come in both spinning and casting in a 16 mm with 10 and 14" tubes. I posted a picture of the casting model on the photo page. [www.rodbuilding.org] Here is some info about them. ATC's patented Vetre Handle System transforms the beauty of their emerald green woven Matrix twill into a durable, ultra light and sensitive carbon rod handle that will match any American Matrix rod blank. An up-locking woven graphite grip assembly (mounted the same as any reel seat), secures your reel into the molded graphite seat for both spinning and casting models. Designed without a fore grip, the handle allows direct hand contact with the blank adding additional sensitivity to this already sensitive and durable woven tube material. This handle provides optimum performance and a beautiful monochromatic look. Warmest Regards, American Tackle Company, Inc. Joe Meehan President +1-508-432-7735 Fax: +1-508-432-6377 email: joe@americantackle.us Web site: [americantackle.us] Re: Vetre Matrix Handles from American Tackle are in!
Posted by:
Emory Harry
(---.client.comcast.net)
Date: March 31, 2005 07:30PM
Joe,
I can see where these handles may very well have some advantages in some applications but are they really lighter than cork?? Re: Vetre Matrix Handles from American Tackle are in!
Posted by:
Joe Meehan
(---.se.biz.rr.com)
Date: March 31, 2005 07:49PM
Hi Emory,
I haven't weighed them but I think it would be very close. By the way that first picture shows a cut-away of the tubular handle so you can see the length of the reel seat threads. Regards, Joe Re: Vetre Matrix Handles from American Tackle are in!
Posted by:
Anonymous User
(---.proxy.aol.com)
Date: March 31, 2005 09:13PM
Monochromatic!!! Are these things approved by Regis Philbin?? Do you also include a matching tie?
Gon Fishn Re: Vetre Matrix Handles from American Tackle are in!
Posted by:
Phil Richmond
(---.tampabay.res.rr.com)
Date: March 31, 2005 10:26PM
Thank god! I ordered mine in December and have been waiting impatiently ever since! Can't wait to see how this thing works. Hehehehehe.
Phil Re: Vetre Matrix Handles from American Tackle are in!
Posted by:
bill boettcher
(---.250.201.25.Dial1.Weehawken1.Level3.net)
Date: April 01, 2005 10:31AM
Think they could be used as a Tennessee Handle?? Re: Vetre Matrix Handles from American Tackle are in!
Posted by:
joe meehan
(---.hsd1.ma.comcast.net)
Date: April 01, 2005 08:21PM
Hi Bill,
I've already got inquires from some of our distributors about the possibility of ordering the tubes only for Tenn. handles. Regards, Joe Re: Vetre Matrix Handles from American Tackle are in!
Posted by:
bill boettcher
(---.248.71.217.Dial1.Weehawken1.Level3.net)
Date: April 02, 2005 07:08AM
Joe
Did not think of those handles got some one that I am building a rod for his son. Likes green. I am using a cork handle on it. That handle would have been perfict. What is the OD on them? Will rings fit ? Thanks Sorry, only registered users may post in this forum.
|