SPONSORS
2024 ICRBE EXPO |
Flex Coat Arbors
Posted by:
Milton (Hank) Aldridge
(---.maine.res.rr.com)
Date: March 24, 2005 08:14AM
Hi Gang.
I broke down and purchased Flex Coat arbors. I know they can be used as 1 piece or cut into smaller pieces and used that way. I would like to find out what you guys do. Do you leave them full (1piece) or do you cut them and put them on like masking tape arbors? Thanks in Advance Hank On The Rocks Fishing Wells, ME. Re: Flex Coat Arbors
Posted by:
Anonymous User
(63.146.104.---)
Date: March 24, 2005 09:06AM
hank- i have used maybe 6 so far, and leave em whole, using FC 5 minute epoxy. works great. Re: Flex Coat Arbors
Posted by:
Anonymous User
(Moderator)
Date: March 24, 2005 09:19AM
They're so light and so inexpensive, I'm not sure that cutting them into shorter sections is really economical.
.......... Re: Flex Coat Arbors
Posted by:
Richard Carlsen
(---.dyn.avci.net)
Date: March 24, 2005 09:47AM
Full length with Rod Bond. Re: Flex Coat Arbors
Posted by:
bill boettcher
(---.248.65.132.Dial1.Weehawken1.Level3.net)
Date: March 24, 2005 11:06AM
I would not want to trust 5 MIN use rod bond. Take the extra time Re: Flex Coat Arbors
Posted by:
Joel Todd
(---.nas32.chicago3.il.us.da.qwest.net)
Date: March 24, 2005 05:09PM
I also use the full length with rod bond. Re: Flex Coat Arbors
Posted by:
Anonymous User
(---.airservices.gov.au)
Date: March 24, 2005 07:37PM
I pre glue the full length of them into my reel seats with rod bond, then when I need the reel seat just pilot drill it then a few twists with the reamer all done, saves the extra time at the construction stage. Re: Flex Coat Arbors
Posted by:
Billy Vivona
(---.ny325.east.verizon.net)
Date: March 25, 2005 07:03AM
The way Myles does it is the way Roger at FlexCoat showed me how he intended the product to be used. Get ALL your reel seats, mix up a big batch of epoxy, and glue ALL the arbors in at the same time. When you need a reel seat, drill/ream whatever. Sorry, only registered users may post in this forum.
|