SPONSORS
2024 ICRBE EXPO |
painting rod blanks
Posted by:
Gary Fore
(---.clt.bellsouth.net)
Date: March 22, 2005 09:48PM
I want to start my first rod, but can not find the color blank i want my rod to be. Can the blanks be painted? What kind of paint should i use?
Any help would be great. Thanks, Neil Re: painting rod blanks
Posted by:
Jason Van Horn
(---.cable.mindspring.com)
Date: March 22, 2005 10:03PM
What color are you looking for? I'm allways suprised with what the members can find for others on here. Post up what color, type etc and you might get the info you are looking for.
Jason Re: painting rod blanks
Posted by:
Gary Fore
(---.clt.bellsouth.net)
Date: March 22, 2005 10:12PM
Thanks Jason,
I want to use a yellowish/gold color. similar to The Eagle Claw rods at the stores. Also want to use a lt.blue or med. blue thread for the wraps Re: painting rod blanks
Posted by:
Fred Murphy
(---.stkn.mdsg-pacwest.com)
Date: March 22, 2005 10:45PM
Gary Fore: Have you done a search on the subject? I haven't painted a blank yet, but have seen a lot of discussion on the board. Just search "painting blanks", you'll get a treasure trove of information.
Murf Re: painting rod blanks
Posted by:
Jay Lancaster
(---.clis.com.136.174.12.in-addr.arpa)
Date: March 22, 2005 10:59PM Re: painting rod blanks
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: March 23, 2005 12:52AM
Zacher,
Just letting you know that your post will soon be deleted. All posts without a first and last name and valid e-mail are automatically deleted by the system There is an article on the marble technique in the Library at the top of the page Mike Re: painting rod blanks
Posted by:
Bruce Wetzel
(---.nmci.navy.mil)
Date: March 23, 2005 07:02AM
Gary, Lamiglas still makes some Honey colored blanks. Check some of the sponsers to the left. Re: painting rod blanks
Posted by:
Rich Kline
(---.newark-24-25rs.nj.dial-access.att.net)
Date: March 23, 2005 07:33PM
Try fussion spray paint, works well. Prep and clean blank, spray in an area where dust is at a minimum. This work for me.
Rich Re: painting rod blanks
Posted by:
Gary Fore
(---.clt.bellsouth.net)
Date: March 23, 2005 10:26PM
Rich,
Were can i find this fussion paint? Neil Re: painting rod blanks
Posted by:
Gary Fore
(---.clt.bellsouth.net)
Date: March 23, 2005 10:26PM
Rich,
Were can i find this fussion paint? Neil Re: painting rod blanks
Posted by:
Rich Kline
(---.newark-44-45rs.nj.dial-access.att.net)
Date: March 24, 2005 08:37PM
Neil:
Fussion spray paint can be purchased from almost any hardware store, I obtained mine at the local True Value Hardware store. Best results with gloss black ,although other color worked , gloss black came out the best. Find an area with little or no dust ! for best results. Rich Re: painting rod blanks
Posted by:
Steve Gilcoine
(---.hsd1.ma.comcast.net)
Date: March 29, 2005 11:49PM
"CUI Products" in the sponsors list has yellow blanks Sorry, only registered users may post in this forum.
|