I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Web Site
Posted by: Jimi Ellis- Decal Connection (---.atlsfl.adelphia.net)
Date: March 14, 2005 01:29PM

We are in the process of moving our web site to a new hosting company. There may be times over the next 3-4 days when you will not be able to connect to our site. Please have patience during this time. You can always email us with your order.

Jimi

Options: ReplyQuote
Re: Web Site
Posted by: Keith Tymchuk (198.237.218.---)
Date: March 14, 2005 06:33PM

Jimi,

Thanks for the heads up...I was going to do some checking on it.

Could you answer this for me...

When using the new water slide decals...I need to allow it to sit in warm water for two minutes before I'll be able to remove it from the backing paper...correct? Is that the 2 minutes your web site instructions refers to?

Thanks,

Keith

Options: ReplyQuote
Re: Web Site
Posted by: Jimi Ellis- Decal Connection (---.atlsfl.adelphia.net)
Date: March 16, 2005 07:01AM

No, never leave a decal in water for more than a few seconds. Dip it in, make sure the backing is wet and then let it sit on your table for the 2 minutes or so. Soaking it in water will cause a lot of problems

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster