SPONSORS
2024 ICRBE EXPO |
Color preserver on Gudebrod HT metallic thread?
Posted by:
Brent Boxall
(---.lafayt01.tn.comcast.net)
Date: March 13, 2005 09:59AM
Do I still need to use a color preserver Gudebrod HT metallic thread?
Thanks in advance, the information I've collected on RodBuilding.Org has saved my projects many times. Re: Color preserver on Gudebrod HT metallic thread?
Posted by:
Tom Doyle
(---.ipt.aol.com)
Date: March 13, 2005 10:16AM
No you don't. This has been discussed in some detail for Gudebrod and other metallics in recent posts. With certain exceptions (such as some of the lighter Sulky metallics, when used in cross wraps), you do not need CP. Re: Color preserver on Gudebrod HT metallic thread?
Posted by:
Spencer Phipps
(---.lsil.com)
Date: March 13, 2005 10:16AM
No you don't, but it sure helps to tack down the trim band and keep them tight throughout the building process. Re: Color preserver on Gudebrod HT metallic thread?
Posted by:
Jay Lancaster
(208.33.68.---)
Date: March 13, 2005 10:46AM
Just like Spencer said. The only reason for CP over metallics is to seal the threads in place. There is no fear of the metallic colors fading like regular nylon would do.
Think of it this way. If you went to 'observe' a wet-t-shirt contest would you rather the contestants wear a white cloth t-shirt or a wrap of Reynolds Aluminum Foil? Metallic threads would act as the aluminum foil would in that there would be no reaction at all. I am in no way condoning wet-t-shirt contests other than in a strict scientific setting. ;-) Jay Edited 1 time(s). Last edit at 03/13/2005 10:49AM by Jay Lancaster. Re: Color preserver on Gudebrod HT metallic thread?
Posted by:
Billy Vivona
(---.ny325.east.verizon.net)
Date: March 13, 2005 02:06PM
DINGDINGDINGDING!!! We have a winner. Jay, you've won the anual best description, with mental image post. lol. I t wa all good till my image girl was draped in Aluminum foil, then I was back to looking for Rodbuilding info. Next time wait a few sentences before you yank that wet tee shirt off the stage. Geez. Re: Color preserver on Gudebrod HT metallic thread?
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: March 13, 2005 02:08PM
Warm thoughts there...
Putter Williston, ND Re: Color preserver on Gudebrod HT metallic thread?
Posted by:
Lou Reyna
(---.hr.hr.cox.net)
Date: March 13, 2005 02:29PM
Ok now, so where is the wet t-shirt contest? Re: Color preserver on Gudebrod HT metallic thread?
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: March 15, 2005 12:56AM
??? Charlotte, 2006 somewhere??? Sorry, only registered users may post in this forum.
|