I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Rod Bond
Posted by: Fred Duncan (---.dsl.mindspring.com)
Date: March 06, 2005 08:06AM

While waiting on blanks, I decided to try RB for the first time, to repair a cracked plastic trolling motor cover. It does take about 24 hrs to set up but running was not an issue at all. I must admit, I LIKE THIS STUFF! Sets up hard but seems to have a certain amount of resiliency to it. Wonderful product! I'm sold...

Options: ReplyQuote
Re: Rod Bond
Posted by: bill boettcher (---.250.162.113.Dial1.Weehawken1.Level3.net)
Date: March 06, 2005 10:08AM

I fixed a crack in my coffee pot over a year ago No leaks

Options: ReplyQuote
Re: Rod Bond
Posted by: Joe Kassuba (---.wa.charter.com)
Date: March 06, 2005 10:53AM

Hello Fred and Bill
Thanks for trying Rod Bond. If we can be of any help drop a line to Trondak.

Sincerely Joe Kassuba


His Rod Shop
Joe Kassuba

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster